Company name : Foshan GRK Commercial CO LTD
Address: No.5-1 YongxingXiang Yanjiang Road Gaoming district Foshan China 528500
Tel./WhatsApp: +86 13660776067 or +86 13726309092
Country of Original: China
Province /State: Guangdong
City: Foshan City
Structure for Epoxy microbead anti-skid floor
--Polish the sub-base
--Sanding the floor
--Microbead top coat
Epoxy micro-bead floor can withstand the rolling of various vehicles (cars, forklifts, carts, etc.), and has certain mechanical properties and aesthetic requirements. At the same time, it can prevent slippage and reduce noise. Factory buildings, industrial and commercial warehouses, underground car parks, etc.
Group A is colored liquid, Group B is colorless liquid,
Two-component material, used together.
Seamless dust-proof, pressure-resistant, impact-resistant
Good wear resistance and long service life
Resistant to general chemical corrosion
Primer is 1:1
Middle layer is 4:1
Top coat is 4:1
Microbead top coat is 4:1
Scope of Application
Factory, warehouse, underground parking lot, industrial land and other heavy-duty ground
Primer 0.15kg/sqm, Middle layer 0.4kg /sqm ,Top coat 0.12 kg/sqm,Microbead top coat 0.15kg/sqm
Ground Requirements before Construction
Flat, high ground strength
After correct construction and curing, it can achieve smooth and smooth effect, uniform color, no construction marks, no bubbles, no shrinkage holes, no impurities, etc. However, some defects caused by improper operation and other subjective and objective reasons are not excluded.
This product is a chemical that is harmful or fatal if swallowed, seek medical advice immediately if swallowed. In case of accidental contact with eyes, rinse with plenty of water. In severe cases, seek medical attention immediately. Pay attention to precautionary measures, fire and explosion protection, and the disposal of residues should comply with relevant national or local government safety regulations.
Store at room temperature of 10°C-30°C, humidity 50%-80%; all materials are placed in a fixed position and marked in this area to avoid confusion. The warehouse is well ventilated and the temperature is at room temperature. Open paint and leaking materials are stored separately and marked.
Primer Group A 18kg,Group B 18kg,
Middle layer Group A 24kg,Group B 6kg,
Topcoat Group A 24 kg, Group B 6 kg.
Microbead top coat Group A 20kg, Group B 5kg.